真实的网上交友

Welcome to the official website of Hubei Kaiyu Cleaning Equipment Co., Ltd!
Back to home page | News and information | contact us
National hotline 400-800-2820
 QR code
  • one
  • two
  • three
  •  High pressure water cleaning machine
  •  High pressure cleaning machine
  •  High temperature and high pressure cleaning machine

News and information Current location: High pressure pipeline dredger > Clean technology >

How to clean the oil pipeline and maintenance skills of high pressure cleaning machine

Number of hits: Release time: August 20, 2019 11:04

How to clean High pressure cleaning machine Oil pipeline and maintenance skills
In the process of long-term use of oil pipelines, oil, grease, wax and other pollutants will inevitably be produced on the inner and outer walls of oil pipelines, which will cause problems such as efficiency of oil pipelines. The use of traditional cleaning methods is often unsatisfactory, because the traditional cleaning method refers to the use of alkaline boiling method to clean oil pipes, which is not only low in efficiency, but also unsatisfactory in cleanliness. So, what kind of cleaning method can be used to achieve the ideal cleaning effect?
High pressure cleaning machine is used for high temperature cleaning. The cleaning efficiency is not only high (the cleaning time of each oil pipe is only about 2 minutes), but the cleaning effect is also very ideal. Generally speaking, the high-pressure water jet temperature of high-temperature and high-pressure cleaning machine can reach 150. C and the pressure can reach 200 bar. From this point of view, not only can high temperature melt grease, wax and oil, but also high pressure water jet can quickly wash these melts. It is cleaned by high temperature and high pressure cleaner. This cleaning method is not only low cost, but also energy-saving and environmental protection. This is a very good cleaning method for oil pipeline.
Please choose our company's high temperature and high pressure cleaning machine to clean the oil pipeline.
Maintenance of plunger pump of high temperature and high pressure cleaning machine
1. After each use of the high-pressure pump, flush the residual liquid in the hose and nozzle with clean water, clean the machine shell, and store the power cord in a fixed place. If damage or insufficient pressure is found, it shall be marked "to be repaired", and the maintenance shall be timely informed before use;
2. Maintenance personnel are responsible for the maintenance of high-pressure pump, check the operation of high-pressure pump once a day, and make records. If it is found that the seal is damaged, aging leads to air leakage, and the pressure does not rise, it should be replaced in time;
3. Check the electrical and mechanical performance of the high-pressure pump motor every half a month, and add necessary lubricating oil to ensure the normal use of the equipment and make records;
4. Regularly check and correct the relief pressure of the safety valve to 1.08 ~ 1.1 times of the rated working pressure;
5. Regularly check the accuracy of the pressure gauge, regularly check the tightness of the belt, replace the damaged vulnerable parts, adjust the gap between parts, and check and tighten the screws;
6. High pressure pump should maintain a certain oil level. Generally, it should be kept six to one seventh of the oil immersed surface. If the lubricating oil is insufficient, it should be filled in time to ensure the normal operation of the equipment;
7. For the pump that needs to be stopped for a long time, wash it with clean water, drain the liquid in the pump body, remove all valves, and apply anti rust oil to the whole pump for anti-corrosion maintenance;
8. If the pump is to be used for a long time, the pump should be inspected and maintained in all aspects, otherwise it can not be started.