真实的网上交友

Welcome to the official website of Hubei Kaiyu Cleaning Equipment Co., Ltd!
Back to home page | News and information | contact us
National hotline 400-800-2820
 QR code
  • one
  • two
  • three
  •  High pressure water cleaning machine
  •  High pressure cleaning machine
  •  High temperature and high pressure cleaning machine

News and information Current location: High pressure pipeline dredger > Clean technology >

How to improve the cleaning effect of high pressure cleaning machine?

Number of hits: Release time: 11:15, August 20, 2019

How to improve High pressure cleaning machine Cleaning effect?
The pipeline cleaning machine consists of three parts: host, flexible shaft and cleaning brush head. During operation, the high-speed rotation of the main unit drives the flexible shaft and the cleaning brush head to rotate at high speed, and at the same time ejects high-pressure water jet. When the cleaning brush head rotates in the pipe, the dirt on the inner surface of the pipe is brushed off and washed away, making the pipe bright and novel.
How to carry out the routine maintenance of pipeline cleaning machine?
1. Turn off the water supply system connected to the washing machine.
2. Flush the hose and filter into the cleaner to remove any detergent residue to help prevent corrosion.
3. Remove the rubber hose and high pressure hose from the pipe cleaner.
4. Trigger the trigger on the servo spray gun rod to release all pressure on the hose.
5. Disconnect the spark plug connecting wire to ensure that the engine does not start.
After long-term use of pipeline cleaning machine, it is necessary to carry out corresponding cleaning, so as to better ensure the use effect and prolong the service life of pipeline. The following section introduces several methods to clean the pipeline and improve the cleaning effect of the pipeline cleaning machine.
1. The flexible shaft used in the flexible shaft machine must be of good quality and weight, and will not increase the burden of lateral and longitudinal movement of the brush.
2. In the cleaning process, the straight pipe is usually cleaned from top to bottom, and the vertical pipe is hung at the opening of the vertical pipe by cleaning method. The cleaning process of the equipment in the vertical pipeline should be observed carefully, and the cleaning effect and cleaning efficiency should be comprehensively evaluated.
For our longitudinal work, use the progressive tube cleaning method. The continuity of the whole cleaning process is the key to the rationality of equipment design. A good flexible shaft washer should be similar to the center and center point of the pipe, as the horizontal direction of the pipe center and center, and make the radius arc movement. The control performance is good when moving vertically.
The pipe cleaning machine is suitable for the cleaning of boiler pipe diameter of 30-100. It can also be used to clean and dredge various pipelines, such as textile, printing and dyeing, chemical, rubber, pharmaceutical, hotel. The machine is light, reliable and easy to operate. Regular cleaning and maintenance of the boiler by machine can greatly improve the thermal effect of the boiler and reduce the labor intensity. The effect of pipeline cleaning machine is better than chemical treatment to ensure the long-term safe use of boiler.